A "frequency set" command in WinOncore? The WinOncore was designed by Motorola for their receivers using their binary command set, it is very strange that this software can have a ConnorWinfield/Navsync proprietary command ($PRTHS,FRQD,<frequency_in_MHz>[*optional_checksum]<cr><lf>) to set the CW12 output frequency. A dedicated software is not needed: using whatever serial terminal program, you just send the above command using the keyboard and you can set any frequency upto 30MHz. For 10KHz just type $PRTHS,FRQD,0.01<cr><lf> (the serial port is 38400,N,8,1). The CW12-TIM must be the NMEA version.
On Sun, Aug 31, 2014 at 4:57 PM, Mike Seguin <[email protected]> wrote: > I got it. WinOncore. Frequency set. > > Mike > > > On 8/31/2014 10:22 AM, Mike Seguin wrote: >> >> I just started working with a Navsync CW12-TIM. I'm interested in >> programming the freq output. >> >> What's the best software to use? >> >> TIA >> Mike > > > -- > > 73, > Mike, N1JEZ > "A closed mouth gathers no feet" > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
