In my opinion, I'd be inclined to find a way to run a suitable wire around the building. I don't think you want your interior electrical wiring serving as the only bond between two different grounds if energy from a lightning strike flows thru your antenna feed line and then thru your time nuts gear that probably has a path to the other ground thru the wiring in the building.
Other fault conditions that cause significant currents to flow thru your ground system could also cause issues if the only bond between the two ground systems is thru your house wiring and time nuts gear. Disclaimer I'm not an electrical engineer or lightning protection expert so please don't rely on this comment. Mark Spencer On 2014-11-26, at 2:54 PM, Hal Murray <[email protected]> wrote: > > [email protected] said: >> The ground rod needs to be bonded to the rest of the building ground system. > > How do I do that effectively if the power goes in the front of the building > and the antenna is on the back? > > > > -- > These are my opinions. I hate spam. > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
