Bob Camp <kb8tq@...> writes: > > Hi > > Looks like something came loose when you swapped around the parts. That or the regulator is very noisy. > > Bob >
I know why the stop1-start is not stable. There is a noise generator enabled. If start & stop1 is OK, I can change configuration to get 45ps or even 22ps resolution. However, does the 45ps or 22ps resolution make any sense while there is 60ps rms noise? In the interpolation scenario, the time we measure changes. It's not like the laser range measure case. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
