Hi So is any of the rest of the family still speaking to you? :) That’s a lot of work. Very nicely done and documented !!
———— Phase noise or ADEV would be well worth checking out. I see no reason why they would be a problem, but one never knows until the test is run. ————— I would suggest *some* resistance to ground on the outputs of the distribution amp. Without any R, you can get into ESD issues when you connect a cable. Is it a big deal - not really. Bob > On Jan 2, 2015, at 8:43 PM, Gerhard Hoffmann <[email protected]> wrote: > > Hi, all, > > over the Christmas season, I have designed and built a frequency doubler from > 5 to 10 MHz and a distribution amplifier for the Lucent KS-24361. A > preliminary writeup is under > > < http://www.hoffmann-hochfrequenz.de/downloads/DoubDist.pdf > > > It features 4 or 5 10 MHz 10 dBm outputs and an optional 1PPS on SMA with > CMOS levels into 50 Ohm. > It is a small board to be mounted inside the KS-24361. > > Comments invited. > > regards, > > Gerhard > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
