--------
In message <[email protected]>, [email protected] writes:
>can you give me more info about th PHK's changes to the oven?
I have not changed the oven.
The only change I will propose so far is this:
Measure the voltage over A15CR5
Multiply by 76
Replace A15R10 and A15R11 with a combination of
<5PPM resistors having that value.
Ie: if your A15CR5 voltage is 7.9 Volt, you should remove
R10 and R11, and put a 600 Ohm resistor there instead.
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
[email protected] | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
