Hello, on 13/10/2015 14:41 you wrote:
> I believe the author was looking into modifying his circuit to use > a LTC6957 as a frontend. Not sure if he ever got around to it. > https://www.febo.com/pipermail/time-nuts/2015-May/092138.html > -=Bryan=- Hi Bryan, now sorted, I have done some `scoping and the LF signal *IS* getting into the divider. I added a splitter I bought from a US member some time ago (thanks for the SMA TO BNC adapter cable!, and now the sine wave is clean from the Trimble splitter. The signals from the divider are still dirty when TX'ing though, but that's not an issue as I rarely use them. Thanks for the info. -- Best Regards, Chris Wilson. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.