Hello Keith, I am sorry to tell you, I did not yet receive the module, don't know what all hells customs is doing with it!
My idea is to add a good OCXO like a hp10811, similar to be used as my good old trimble thunderbolt using the laptop. Perhaps I will need then some support for. Many thanks, regards Arnold, DK2WT Am 30.10.2015 um 06:07 schrieb Keith Loiselle: > Hello everyone, > > The M12 Replacement Receivers have been in your hands for a few weeks. We > appreciate the feedback we have received off list from a few. Let us know > if you have had any problems or concerns as well as positive results that > you can share. > > Thanks, > Keith > > > > Keith > > On Mon, Oct 12, 2015 at 9:25 AM, Keith Loiselle <[email protected]> > wrote: > >> Tom, >> >> The JLT M12M replacement receiver should work in the Commsync II. If you >> find any issues we would work to fix them a firmware update. >> >> Keith >> >> >> Keith >> >> On Wed, Oct 7, 2015 at 8:46 PM, Tom Knox <[email protected]> wrote: >> >>> In my humble opinion Jackson Labs continues to raise the bar in GPS time >>> and frequency with products that are compact, reasonably price, and most of >>> all offer exceptional performance. Any idea if these will plug and play in >>> my FEI/Zyfer Commsync II"s >>> Thanks All >>> Thomas Knox >>> >>> >>> >>>> Date: Wed, 7 Oct 2015 14:44:03 -0700 >>>> From: [email protected] >>>> To: [email protected] >>>> Subject: Re: [time-nuts] Jackson Labs M12M Replacement Receiver >>>> >>>> If you are interested in purchasing you can do so directly through our >>> ebay >>>> listing here: >>>> http://www.ebay.com/itm/-/181896123655 >>>> >>>> But, please contact me if you have any questions. >>>> >>>> Thanks, >>>> Keith >>>> >>>> >>>> >>>> Keith >>>> >>>> On Wed, Oct 7, 2015 at 7:14 AM, Keith Loiselle < >>> [email protected]> >>>> wrote: >>>> >>>>> Hello everyone, >>>>> >>>>> >>>>> >>>>> Since there are many Fury GPSDO users here and many other users of the >>>>> Motorola M12+ and M12M timing receivers, we wanted to introduce our >>> new >>>>> product which is an M12M compatible timing and navigation receiver >>> that >>>>> uses the latest uBlox M8T GNSS receiver, and is a one-to-one >>> replacement >>>>> for the aging, and hard to use Motorola/iLotus GPS receiver. >>>>> >>>>> >>>>> >>>>> This is kind of like a super M12M, with significant improvements in >>> the >>>>> 1PPS timing accuracy and stability, support for receiving two of any >>> of the >>>>> standard GNSS systems at any one time (GPS with SBAS, Glonass, QZSS, >>>>> BeiDou, and soon Galileo), and true plug-and-play operation. It >>> should work >>>>> in pretty much most Motorola M12+ and M12M binary command >>> applications. >>>>> >>>>> >>>>> The unit is a form-fit-function compatible replacement for the >>> M12M/M12+ >>>>> receivers, and has been qualified on the JLT Fury GPSDO as well as the >>>>> Microsemi/Symmetricom XLI, and provides a massive upgrade in GNSS >>>>> performance such as -167dBm tracking capability (think indoors >>> reception >>>>> may now be possible under certain circumstances), 72 channels >>> capability >>>>> for very fast cold-start and re-acquisition, and multi-GNSS support. >>>>> >>>>> >>>>> >>>>> It has some additional features such as: >>>>> >>>>> * Two USB ports, one for easy SCPI control, one for full access to >>> the >>>>> uBlox commands for setup, as well as Carrier Phase, Almanac, and >>> Ephemeris >>>>> data. The unit can also be powered via the USB ports and used >>> stand-alone >>>>> sitting on a desk etc. There is no setup required though >>> out-of-the-box, >>>>> all setup is optional >>>>> >>>>> * 7-Segment LED status display and 5 additional status LEDs show GNSS >>>>> status, fix status, signal strength, UTC time, and number of sats >>> tracked >>>>> * DIP switch for easy configuration of which GNSS systems should be >>>>> enabled, Position Hold mode versus 3D Mobile mode, etc (these >>> settings can >>>>> be over-written by USB commands) >>>>> >>>>> * 1Hz to 10MHz+ buffered Synthesized (NCO) output that is >>>>> frequency-locked to the GNSS system, and can be easily configured >>> through >>>>> the USB ports >>>>> >>>>> * Position Hold mode with Auto Survey, or full 3D mobile mode >>> (selectable >>>>> via USB, Motorola binary command, or via the DIP switch), supporting >>> full >>>>> Auto Kalman setup depending on vehicle dynamics (including >>> auto-selection >>>>> of Carrier Phase versus Doppler tracking etc) >>>>> >>>>> You can find out more in the User Manual and Spec Sheet available >>> here: >>>>> >>>>> >>> http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_UserManual.pdf >>>>> >>>>> and >>>>> >>>>> >>>>> >>>>> >>> http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_Specsheet.pdf >>>>> We are making this unit available to Time Nuts users for a special >>> pricing >>>>> of $185 per unit plus shipping. Pricing will revert to the list price >>> of >>>>> $220 at the end of this month. We are asking for anyone using the >>> M12+ or >>>>> M12M receivers in other than the Fury or XLI GPSDOs to help us test >>>>> compatibility with those systems, and hope to have as many different >>>>> products as possible tested out with your help. >>>>> >>>>> >>>>> >>>>> Please contact me OFFLINE(!) if you are interested in this unit. >>>>> >>>>> Thanks, >>>>> Keith >>>>> >>>> _______________________________________________ >>>> time-nuts mailing list -- [email protected] >>>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>> and follow the instructions there. >>> _______________________________________________ >>> time-nuts mailing list -- [email protected] >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
