If you telnet or nc into your rpi on port 3200, you should get a connection and you should get a bunch of garbage. If not, ser2net isn’t working. Is it running? sudo /etc/init.d/ser2net restart (did you do that after changing the config file?)
If ser2net is working then it must be something about the LH params that’s incorrect. Do you have the correct IP address and port? Is there anything between the two - firewalls or routers or the like? > On Jan 12, 2016, at 12:58 AM, Ed Armstrong <[email protected]> wrote: > > More details please. I've installed it, but can't make it work. My USB/serial > cable is /dev/ttyUSB0 just like yours. I used your .conf file. But lady > heather says connection rejected. > > > Ed > > On 1/11/2016 8:00 PM, Nick Sayer via time-nuts wrote: >> I answered my own question. :) >> >> ser2net works perfectly as a “server” for LH. I’m using a USB to serial >> adapter and the ser2net.conf line for it is >> >> 3200:raw:0:/dev/ttyUSB0:9600 8DATABITS NONE 1STOPBIT LOCAL >> >> And for LH, /ip=n.n.n.n:3200 works. >> >> >>> On Jan 11, 2016, at 9:30 AM, Nick Sayer via time-nuts <[email protected]> >>> wrote: >>> >>> How about a simpler question. I see in the documentation that LH can use a >>> network connection to remotely read. Can a server for that protocol be made >>> for the RPi? That would be super awesome deluxe for me, and assuming it's >>> just a serial-to-TCP protocol should be nearly trivial to write (heck, >>> netcat might already just do it). >>> >>> Sent from my iPhone >>> >>> On Jan 10, 2016, at 4:31 PM, Mark Sims <[email protected]> wrote: >>> >>>>> I wonder if I've got anywhere near the skills to do it... >>>> Probably not right now... it's not so much as knowing C, it's knowing >>>> the ins and out of knowing how your operating system (Windows, Linux, etc) >>>> interfaces with your hardware (display, mouse, serial port, keyboard). >>>> Basically, if you have to ask the question, your are probably not ready >>>> to attempt the task. >>>> Lady Heather is a pretty simple program, but it is rather long and >>>> divided into 5 files. Just getting set up to compile it in a new >>>> environment can be quite a challenge to the un-initiated (acouple of >>>> toupees worth of hair pulling once you can compile and link a simple >>>> "hello world" program. >>>> Then you need to figure out how to draw dots and characters, talk to the >>>> serial port, talk to the mouse, talk to the keyboard. Pretty basic >>>> stuff once you are familiar with your operating system/environment, but >>>> not something most people do everyday... >>>> _______________________________________________ >>>> time-nuts mailing list -- [email protected] >>>> To unsubscribe, go to >>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>> and follow the instructions there. >>> _______________________________________________ >>> time-nuts mailing list -- [email protected] >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
