Folks,
It's a 2.2uF cap, with a 0.125" lead spacing, and I'm looking for 125dC
temp rating. I wondered if there were other characteristics such as
ESR/ESL I need to keep in mind.
d.
On 20 Jan 2016 14:32, Dan Harboe Burer wrote:
Hi,
You need one more piece of info: its value! E.g. 1uf, 0.35uF, 2.2uF,
10uF? That is quite important :)
Just don't use too old tantalum caps - they tend to absorb moisture over
time (when stored incorrectly) - and self destruct as you have
experienced..
I just experienced the same while renovating a Tek 475 'scope.
Regards
Dan (A newbie from Denmark)
-----Oprindelig meddelelse----- From: davidh
Sent: Tuesday, January 19, 2016 11:21 PM
To: [email protected]
Subject: [time-nuts] PRS10 C900 replacement
Hi All,
While still appearing to function normally, my PRS10 started to smell:
C900 in the lamp assembly has self destructed.
The SRS parts manual merely says "Capacitor, Tantalum, 35V, 20%, Rad",
so I'd appreciate any advice on what additional parameters I should be
looking at in selecting a replacement.
Thanks,
david
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
