Hi Where (what continent) was the seller located?
Bob > On Mar 5, 2016, at 4:45 PM, [email protected] wrote: > > I got the replacement MTI 260-0624-D OCXO today. > > It rattles! > > I didn't even bother trying to power it up. Not much point. I have not taken > it apart, but have notified the seller. I may disassemble this one as well, > depending on what the seller says. > > Mike > > >> I just received a 5Mhz OCXO from eBay (MTI 260-0624-D OCXO). After testing >> it, >> it is clear that it is defective. > >> 1. It never heats up. > >> 2. The reference voltage is zero. > >> 3. Only noise is seen on the output pin. > >> I tested with a 12.54V, 2A supply voltage with around 30mV noise. That should >> be sufficient to test. > >> All I was looking for was a 5Mhz signal whose frequency changed when the >> adjustment pin was either tied to ground or the reference voltage. Never got >> that far because I never go a signal at all. > >> The seller packed it well and shipped it promptly. I will see how he handles >> it. > > >> Mike > >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > > > -- > Best regards, > Timenut mailto:[email protected] > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
