Did you use the CFG-TMODE svinVarLimit to set 350 and the svinMinDur to set 32400? The CFG-TMODE svinVarLimit is a variance in squared mm, not a standard deviation...
On Fri, Apr 15, 2016 at 6:27 AM, Bob Stewart <[email protected]> wrote: > I hope I haven't posted about this before, but it's something that's bugged > me for awhile. When I run a survey-in on an LEA-6T, the > CFG-TMODE2->fixedPosAcc value seems to be wrong. For instance, I ran a > survey today and told it to run for 32,400 seconds and reach at least 350mm > accuracy. When it finished, TIM-SVIM reported it had run 38,126 seconds with > a mean 3D std deviation of 350mm. OK, so far. So, I go look in the > CFG-TMODE2 structure and it reports 122mm. That seems a bit odd, but OK. > And then I squared 350, and came up with 122500. It appears that instead of > just moving the 350mm value over to the TMODE structure, they've squared it > and divided it by 1000. I've noticed this happening on at least 2 versions > of the 6T. I suppose I should do the same test on the M8T. > > Bob > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
