Hi, Regarding the Lucent box- I wanted to let everyone know that once it locked to satellites, I have a 10 MHz out. The output was a square wave with some ringing, but I built a three element low pass filter and now I have a really nice 10 MHz sine wave. Thanks to all!
Last question.... I see it has a RS-422 output on one of the connectors. If I build or buy a 422 to 232 converter can I expect to be able to view the unit's data output with something like Lady Heather or Tboltmon? Or at least see an output with Hyperterminal? Thank you. Chris KD4PBJ > On Sep 6, 2016, at 16:42, Bob Camp <kb...@n1k.org> wrote: > > Hi > > One might *think* a redundant system would work fine with the plug yanked. > In this case …. nope. It needs to have a dummy connector on it to get the > device > running. I agree that this is an “interesting” way to do it. Regardless of > that, they > did the units need the signals from the other box (or fake signals) before > they > will do useful stuff. > > Bob > > >> On Sep 5, 2016, at 10:22 PM, Bill Hawkins <bill.i...@pobox.com> wrote: >> >> Fake connections? Isn't a redundant system supposed to allow one box to >> be disconnected? >> >> Bill Hawkins >> >> -----Original Message----- >> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Bob >> Camp >> Sent: Monday, September 05, 2016 8:20 PM >> To: Discussion of precise time and frequency measurement >> Subject: Re: [time-nuts] Lucent RFTFm-II-XO >> >> Hi >> >> If you only have one box, you need to be sure the "fake" connections on >> the interconnect are correct. If they are not, you will not get it to >> operate correctly. >> >> There also is a survey process if you have not had it running in your >> location before. That could take a few hours to a few days depending on >> your antenna. >> >> Bob >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.