I wounder if originally the designer was hoping to use all 8 wire or'd inputs to lower the input referred noise during midscale transition. Then backed out later for some reason.
On Fri, Oct 28, 2016 at 1:03 PM, Scott Stobbe <[email protected]> wrote: > Could also be a quirk about the 74S30 that gives it better phase noise > over a basic buffer. > > > On Friday, 28 October 2016, jimlux <[email protected]> wrote: > >> On 10/28/16 9:13 AM, Scott Stobbe wrote: >> >>> The OCXO82-59 datasheet lists 12V supply, 5V clock out, could also be a >>> blown regulator in your ocxo, if it is indeed a 12v model. >>> >>> There you go..the design could use a 74S30 as a driver - it's fast, >> fairly good drive, but runs off 5V. If the regulator is shorted, and you >> put 12V on it, it will cook. >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to https://www.febo.com/cgi-bin/m >> ailman/listinfo/time-nuts >> and follow the instructions there. >> > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
