Is there a way I can help with this project? If I had the specs to look at, maybe I would be able to run off a bunch of plates. If we could batch them up I would do them for the cost of shipping.
Does anyone have a dimensioned print, picture, cad drawing of the plates? > On Apr 28, 2017, at 11:33 AM, jimlux <[email protected]> wrote: > > On 4/28/17 10:09 AM, Bob kb8tq wrote: >> Hi >> >> If you go with the PCB approach, the nice thing is getting stuff like >> the slot for the D connector done at the PCB fab. That way you >> have something that drops right in and works. The downside is that >> not every pcb house is happy doing that sort of “CNC work”. I >> have absolutely no idea why. They all have to run some sort of gear >> to cut the boards apart. Cutting slots or weird holes with it is pretty >> trivial. >> >> Bob > > what about Front Panel Express? They're in the whole business of small run > panels. Not the cheapest place around, and you use their design tool, but > I've been happy with the quality of their work. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
