Good evening all,
There is a saying: "a man with one watch knows the time, a man with two
is never sure." Clearly, this man wasn't a timenut and didn't have GPS. ;)
I've been working on the Arduino code for the TruePosition boards that
quite a few of us have bought from the e-place.
It's my first real foray into both Arduino and the C language. (About a
million years ago I was reasonably competent with FORTRAN...the 1977
version...) It's mostly working - I can receive and display pretty much
everything that comes out of the unit minus a few parameters. I can
display it all on three pages on a 4 line by 20 character I2C display.
Currently, the pages are selected by grounding out one of two pins, or
having nothing grounded. Eventually, I'm going to change this so that
it changes display pages when a button is pressed. I don't have
lat/long display yet, nor can I handle doing a survey, but those are coming.
My code probably would make a real programmer vomit, but hey, it works. :)
Back to the man with multiple watches. I was having a very frustrating
issue with my TruePosition and Arduino code being one second behind my
other sources of time. I went round and round, trying to figure out why
the TruePosition thru the Arduino was a second slow. In the end, it
turns out that it wasn't slow...it was correct...but that my other
sources of time have errors.
I finally proved this to myself by firing up an old Trimble Lassen LP
GPS board unit equipped with a 1PPS tick light and serial output...and
it was clear that it matched the TruePosition after correcting for the
fact that my TruePosition / Arduino code only updates the display when
1PPS is asserted high...but that the Lassen LP displays the serial
message before it becomes valid at the next 1PPS tick.
I was slightly embarrassed...I should have known that the other sources
of time all had sources of error beyond my control. I should have
trusted the TruePosition as being the purest, least complicated, and the
path I knew the most about between GPS and my eyeballs.
So for a while...the statement was true. With my multiple sources of
time...I really didn't know the time. But it was also untrue, as when I
got agreement between two very "pure" sources of time, I knew everything
else was wrong. ;)
I'm getting to the point that once I've got the button logic working,
I'll send out my source to anyone who wants to take a look at it or use
it. I will stipulate one condition - you can't make too much fun of how
poorly programmed it is. ;)
thanks much and 73,
ben, kd5byb
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
