Bruce, Search the TimeNuts archives. There are many posts with details on installing the OCXO and a few minor required config changes for the TS-2100. I did this upgrade with a
MTI 240-0530-C a few years ago and both relied on the archives and added to the group knowledge. I suggest you search TS-2100 OCXO. On Wed, Mar 21, 2018 at 9:21 PM, Bruce Lane <[email protected]> wrote: > Fellow Clock-Tickers, > > I've got a pair of Symmetricom TS2100's, both of which have the > basic > TTL oscillator module for their reference oscillator. As other owners of > these units are probably aware, the board is also laid out for a couple > of different types of OCXO. > > I've got what I believe are the correct OCXO's coming from an Ebay > vendor. They match the source voltage (12VDC), the control voltage > range, and the pinout. > > My question is, do I need to make any configuration changes to the > 2100's, in terms of jumpers or anything? Or is it literally a case of > swap-and-play? > > Thanks much. > > -- > --- > Bruce Lane, ARS KC7GR > http://www.bluefeathertech.com > kyrrin (at) bluefeathertech dot com > "Quando Omni Flunkus Moritati" (Red Green) > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
