I highly recommend the Practical Guide created by Bill Feldmann, N6PY (sk, 2007), found in the KO4BB repository. — NOTE: Check for damage by the NiCad battery !! —- A PRACTICAL GUIDE FOR USING THE HP 3586A/B/C SELECTIVE LEVEL METER Expanded Version, (Version 2.2), September 2007 by Bill Feldmann, N6PY (Addition of figures and repagination courtesy of Perry Sandeen 7/09) http://www.ko4bb.com/manuals/24.14.254.9/A_Practical_Guide_For_Using_The_HP_3586.pdf
The HP 3586 family of Selective Level Meters was designed for the measurement of low power or voltage levels on telephone lines carrying multiplexed single side band radio frequency signals along with lower frequency audio signals. It’s designed to test and troubleshoot parameters commonly found on these lines. This instrument is a very sensitive, selective and accurately calibrated receiver that’s also capable of outputting a very low distortion signal of 0dBm at exactly the frequency it’s tuned to. == greg, w9gb Sent from iPad Air _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.