Hi If you are doing a longer run into one of the data analysis services - it does not seem to matter much what the spacing on the readings is. One second data does not seem to produce any better result than 30 second data. I don’t think that the 3 second rate on the Trimble will have much impact on a 24 hour data set.
Bob > On Jun 3, 2018, at 1:57 AM, Mark Sims <hol...@hotmail.com> wrote: > > Well, with a little prodding and help from Magnus, I now have the Trimble > devices outputting RINEX files. They have pseudorange, doppler, and signal > strength observations. A 5 hour 1Hz run was sent to CSRS-PPP and the > lat/lon/alt error ellipses were in the 250/250/700 mm range... that should > improve with a longer run. > > Firmware issues in the original Resolution-T limit those to a 3 second > observation rate. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
