Also note that Heather can only get/update the FC value (usually( every two seconds. Occasionally, due to vagaries in the PRS-10 response timing, you can see two consecutive values in the log that are not the same.
> 2) Have any of you ever logged the FC values while at the same time taken > precision measurements of PRS10 output phase? I think that Heather can do that if you use a TICC or counter as an auxiliary input device (/ei command). In that mode Heather gets the "PPS" and/or "OSC" values from the counter. Since the FC value is treated as the Heather "OSC" value, the PPS value would come from the counter (chA on a TICC). I'll try to do that next week... my TICC and 5370 are doing something else right now. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.