Hi, if its of any help I (still) have a box of goodies including some 10 and 22 GHz Gunnplexers. would the diodes be of any use?
The RX (IIRC its a varactor) diode is structurally very similar to an SRD, maybe possible to adapt it if as I expect the resonance is tuned to near 6 GHz by "cooking" it under controlled conditions. If its a close harmonic the diode might pull fine. I think the parameters would need tuning but I have four (!) of them and some other bits which you are welcome to test. Joe Gwinn > Regards > Paul > WB8TSL > > On Mon, Aug 27, 2018 at 8:03 PM, ed breya <[email protected]> wrote: > >> I forgot to mention: >> >> If you've been diagnosing by swapping parts, be aware that changing the A3 >> is the same as changing the SRD - they won't necessarily match anymore, so >> would need adjustment. >> >> Maybe your original SRD was just fine, but the whole set needed >> adjustment. Who knows what may have been tweaked or mis-tweaked by >> individuals working on it previously. If the original SRD is intact, just >> check to see if it's still a diode (should look the same as a regular Si >> diode, with maybe a little higher forward voltage drop). If so, it's >> probably OK and can be returned to service. >> _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
