How about using a ProgRock on Hans Summers QRP Labs website? This is a programmable crystal replacement.
Chris KD4PBJ > On Sep 14, 2018, at 8:06 PM, paul swed <[email protected]> wrote: > > The beauty of a $2 arduino and a drop of code snitched from Engineer google. > OK enough of that back to the thread. > Regards > Paul > WB8TSL > >> On Fri, Sep 14, 2018 at 8:04 PM, Mike Feher <[email protected]> wrote: >> >> Not when I built them in the late 60's and early 70's. All discrete. 73 - >> Mike >> >> >> >> Mike B. Feher, N4FS >> >> 89 Arnold Blvd. >> >> Howell NJ 07731 >> >> 848-245-9115 >> >> >> >> -----Original Message----- >> From: time-nuts <[email protected]> On Behalf Of Richard >> (Rick) Karlquist >> Sent: Friday, September 14, 2018 7:15 PM >> To: Discussion of precise time and frequency measurement >> <[email protected]>; ed breya <[email protected]> >> Subject: Re: [time-nuts] Programmable clock for BFO use....noise >> >> >> >> >>> Finally, of course, you can use DDS. This is nearly an ideal case for >> >> >> >> The trouble with a DDS is that you need a microcontroller with software >> just >> to baby sit the thing. >> >> >> >> Rick N6RK >> >> >> >> _______________________________________________ >> >> time-nuts mailing list -- <mailto:[email protected]> >> [email protected] To unsubscribe, go to >> <http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com> >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >> >> and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to http://lists.febo.com/mailman/ >> listinfo/time-nuts_lists.febo.com >> and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
