Those are excellent images. Just needs a shot of the track side of the larger board.
On Thu, Oct 25, 2018 at 8:38 PM Azelio Boriani <[email protected]> wrote: > Images of the 8600 can be found here: > <http://www.leapsecond.com/museum/osa8600/> > A paper on the 8607 BVA with the oven schematic is here: > <http://rubiola.org/pdf-articles/conference/2007-ifcs-xtal-osa.pdf> > Maybe it is similar to the 8600's oven. > On Thu, Oct 25, 2018 at 8:26 PM paul swed <[email protected]> wrote: > > > > Ulf > > I have no details. But perhaps off list we could reverse engineer it. > > Simply a suggestion. Especially since you have it open. > > Regards > > Paul > > WB8TSL > > > > On Thu, Oct 25, 2018 at 2:15 PM Bob kb8tq <[email protected]> wrote: > > > > > Hi > > > > > > Even with an “account”, most oscillator companies will not supply > internal > > > details on their product. That’s in part > > > to protect their IP. It also reflects the complexity of tracing back to > > > exactly what doc’s apply to an older unit. The > > > normal drill is for you to send it back and they take a look at it. > They > > > then quote a repair charge and you either > > > go ahead with it or have them send it back. > > > > > > Bob > > > > > > > On Oct 25, 2018, at 1:56 PM, Ulf Kylenfall via time-nuts < > > > [email protected]> wrote: > > > > > > > > > > > > Many monts ago I approached the list regarding an Oscilloquartz > > > 8600-3(945.860.011.03 s/n 422) 5 MHz Ovenized Crystal Oscillator. It > had > > > aged and was 1 Hz off and couldnot be braught back to 5.000.000 MHz. > > > > Since I did not have "an account" with Oscilloquartz or what they are > > > calledtoday, I was not able to get any help from them. > > > > There was one answer off the list from someone who could possibly > > > helpbut that person either forgot or did not have any relevant > > > informationto share. > > > > A box with the dismantled unit has been laying on my shelf for months > > > and I am therefore asking again. If there is no information about > thisunit > > > available I will scrap it. I do not know of any other forumto ask. > > > > Best Regards > > > > > > > > Ulf KylenfallSM6GXV > > > > > > > > _______________________________________________ > > > > time-nuts mailing list -- [email protected] > > > > To unsubscribe, go to > > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > > > and follow the instructions there. > > > > > > > > > _______________________________________________ > > > time-nuts mailing list -- [email protected] > > > To unsubscribe, go to > > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > > and follow the instructions there. > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
