Andy pretty much what I did also. A loop in the basement as suggested by a time-nut. Radiations quite low depending on the floor of the house and walls its 100uv to 30 uv. Did resonate it with a cap that seemed to improve things. But no matter it works for what I need and the clocks are happy. I leave the simulator on all of the time now as no matter the time of the day or battery change the clocks lock in the 3 or so minutes. Since I don't own an official lacrosse no issue here though perhaps mid January I will pick one up cheap... Chuckle. If I do I guess l'll have to build a BPSK version. Oh hang on there thats what the de-psk-r is. Just add 60 KHz. Actually depending on the clocks cost as they get dropped maybe not a bad idea. Have fun with your system. Regards Paul WB8TSL
On Sat, Oct 27, 2018 at 6:04 PM Andy Backus <[email protected]> wrote: > For those still interested in GPS to WWVB simulation -- after trying a few > antenna designs I found that a 50-foot loop of #26 enameled wire stapled to > the rafters in the basement works quite well. Putting 35 ma (rms) of 60 > kHz WWVB signal through it lights up the house quite nicely. I don't know > yet if it also lights up the neighbor's house. I think I will investigate > that question when (and if) they pull the plug in Colorado. But I am > prepared. > > > Not so much for my La Crosse Technology WWVB BPSK clock. I think it will > get swamped out. Can't have everything, I guess. > > > Andy Backus > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
