Hi, the BVA has a very small frequency calibration range. I have solved this analogous problem on two 1000B by replacing the fixed capacitor which determines the base frequency of the resonance inside the oscillator. I think it's the only way to solve the problem. There are no wiring diagrams but with a little patience you can identify the capacitor and increase or decrease its value. cheers Luciano
Da "time-nuts" [email protected] A [email protected] Cc [email protected] Data Tue, 30 Oct 2018 22:40:07 +0100 Oggetto Re: [time-nuts] Oscilloquartz 8600... Hej Ulf, On 10/30/18 10:18 PM, Ulf Kylenfall via time-nuts wrote: > > Regarding the Oscilloquartz 8600-3 that was 1 Hz off the frequency... > I have received information off the listthat I think will be helpful. > I will give it another try. One of mine is off in similar sense. It can't be tuned to be sharp on 5 MHz anymore. The way that I use my main pair is as phase-noise reference for the TimePod. But, I'd love if I could tweak it back. Cheers, Magnus > Cheers > Ulf KylenfallSM6GXV > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
