Hi Appears to be an Italian clone of the generic timing antenna. That is only a guess and it could easily be something very different …. Since it’s a part made for Erickson by somebody else, you would need their part number to properly track it down. If it’s a custom part, even that might be impossible.
Bob > On Nov 4, 2018, at 12:57 PM, Toby Riddell <[email protected]> wrote: > > I spotted this on Ebay, the price is very attractive and I saw this model > mentioned previously in the mailing list archives: > > https://www.ebay.ca/itm/Ericsson-KRE-1012082-1-GPS-Antenna-26dBi-For-HUBER-SUHNER-Bracket-84097323/272646019498?hash=item3f7af819aa:g:US8AAOSwRUhZAIhz:rk:3:pf:0&vxp=mtr > > Anyone have a manual or datasheet for it? I cannot seem to find one using > Google. > > > On Sun, 4 Nov 2018 at 12:41, Matthew D'Asaro <[email protected]> wrote: > >> For what it is worth, I got a used HP/Symmetricom 58532a antenna off of >> eBay for about $50. It needed a minor repair (broken internal coax) but >> once that was done it has worked great for me. The other one I considered >> was the 58504a but they were more expensive on the used market and didn't >> seem as weather proof (a special weather proof cap was offered as an add-on >> but most don't have it) so I went with the newer 58532a. >> >> -Matthew D'Asaro >> >>> On Nov 4, 2018, at 8:43 AM, Toby Riddell <[email protected]> >> wrote: >>> >>> Thanks Scott - I will look into getting one of those. And noted re. the >>> roofline! >>> >>>> On Sun, 4 Nov 2018 at 07:26, Scott McGrath <[email protected]> wrote: >>>> >>>> For timing use ideally it should be above the roofline by at least >> several >>>> feet otherwise satellites close to the horizon will be not be visible. >>>> >>>> The generally preferred antenna is the Agilent/Keysight/Symmetricom. >>>> 58504A antenna also any outdoor antenna made by Trimble or TrueTime as >> long >>>> as antenna does not use a downconverter. >>>> >>>> >>>> >>>> On Nov 3, 2018, at 5:26 PM, Toby Riddell <[email protected]> >> wrote: >>>> >>>> Hi all, >>>> >>>> I want to fit a GPS antenna on our house (the attic is being renovated >> and >>>> it just occurred to me that if I move fast I can get it done before the >>>> walls are closed up again!) >>>> >>>> I was planning on having it mounted on a south-facing wall but below the >>>> roofline - does this sound okay for picking up satellites? It can poke >>>> above the roofline if needed as long as the mounts are on the wall (not >> the >>>> top of the roof). >>>> >>>> Is there a recommended antenna? I am planning on feeding it into an >> Oncore >>>> GPS module which will then interface to a Soekris net4501 running >> nanoBSD >>>> and ntpns. >>>> >>>> Thanks! >>>> >>>> Toby >>>> _______________________________________________ >>>> time-nuts mailing list -- [email protected] >>>> To unsubscribe, go to >>>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >>>> and follow the instructions there. >>>> >>>> _______________________________________________ >>>> time-nuts mailing list -- [email protected] >>>> To unsubscribe, go to >>>> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >>>> and follow the instructions there. >>>> >>> _______________________________________________ >>> time-nuts mailing list -- [email protected] >>> To unsubscribe, go to >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >>> and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com >> and follow the instructions there. >> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
