I checked the TBoltmon files at http://leapsecond.com/pages/tbolt/ and they're fine. Grab a new copy if you suspect something wrong on your end.
The usual reason that you get a com port error is that the port doesn't exist, or that it's beyond com16. Does this old computer have native com ports or are you using a serial/USB adapter? Look in the device manager (devmgmt.msc) to find the actual port number. If you have a valid port number but you don't trust the serial adapter, jumper pins 2 and 3 and then use hyper terminal (hypertrm.exe) to see if the loopback works. /tvb ----- Original Message ----- From: "Richard Solomon" <[email protected]> To: "time-nuts" <[email protected]> Sent: Thursday, November 15, 2018 7:22 AM Subject: [time-nuts] TBOLTMON Error Message > I downloaded a copy of TBOLTMON and installed it. When > I try to open it I get a Com Port Error Message no matter > which port I try (#1 through #16). > The computer has a Windows XP O/S. > > I also tried it on another computer with a Windows 10 > O/S and get the same results. > > Perhaps I got a corrupted copy ?? > > Any suggestions ? > > Thanks, Dick, W1KSZ > > ps: any other T-Bolt monitoring programs I can try ? > > Sent from Outlook<http://aka.ms/weboutlook> > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
