I placed a large fan in front of the heat sink and it only cooled it down to 69C according to the case temp sensor. There's no way
the case is actually anywhere close to that temp, it's maybe 40C with that fan running. I'll replace the LM45C and see what happens.
Scott
On 11/16/18 5:50 PM, Dana Whitlow wrote:
My PRS-10 (a telecom version) runs with a heatsink temp of around 55C of
a bit less. But some areas of the case actually run a few deg hotter than
that.
Dana
On Fri, Nov 16, 2018 at 3:49 PM Mark Sims <[email protected]> wrote:
My case temp runs around 70C with the SRS heatsink installed. If you
don't have a heatsink (a rather bad idea) it might run 80C. The latest SRS
heatsinks don't seem to be as good as the earlier units which had a lot
more metal to them... my heatsink is the later model.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
