Hi, Thanks for all the replies. Looked into the Heol replacement gps module, bit bullet and ordered one. Arrived today and on re power up, the system was tracking 8 satellites 3D in 3 or 4 minutes. Quite impressive really and a great improvement on the original module, even without the firmware issues.
Still have the power down / losing setup fault. If it's powered down, the next power up shows cleared network info, ip, mask and route etc, together with rubbish on the display.May be other parameters as well, but my guess is that it's reverting to defaults, perhaps because of a checksum fault in the firmware or eeprom. Will try re installing the firmware, which I updated to the final version sometime ago, but apart from that, no idea what the fault might be. Eeprom dump included. If another member has one of these, do these values look sane ?. No idea of function though... Regards, Chris 35 ? root eng eeprom 36 ? read fe 55 73 7c 00 00 00 46 33 30 30 30 30 30 32 31 00 00 00 00 00 00 00 00 00 a0 6e 04 14 4a 56 43 58 4f 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ed 00 00 00 14 3f 7f df 03 00 04 00 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
