For low cost comb generators/frequency markers take a look at
www.hsmicrowave.com
Regards...Bill - N6GHz
On 1/4/2019 3:29 PM, Bob Albert via time-nuts wrote:
I would imagine the switch selects every 50 or 100 MHz for easier
identification of harmonic number.
Bob
On Friday, January 4, 2019, 3:10:36 PM PST, Brooke Clarke
<[email protected]> wrote:
Hi:
Made by Control Electronics Co. Inc, Model 121, with Navy Calibration Program
stamp.
This is a comb generator with outputs between 50 and 11,000 MHz that uses a 50
MHz crystal as the source.
There's a switch for 50 or 100 Mhz the function of which I don't get.
The 12AT7 dual triode tube used as the oscillator has the crystal connected
between the two cathodes, a configuration I
haven't seen before.
The output circuit also seems strange.
Any thoughts or links to documentation?
https://prc68.com/I/VHF-UHFFrequencyCalibrator.shtml
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
