Mark, I had pretty good luck with a Hittite prescaler built into a board for the 5328 as outlined by Bert, VE2ZAZ.
http://ve2zaz.net/hp5328a/hp5328a_prescaler.htm It's a wee bit deaf as frequency goes up, but works just fine! Bob On Thu, Jan 24, 2019 at 1:00 AM Mark Spencer <[email protected]> wrote: > Hi: > > I'm pondering ways I can use my collection of time interval counters > (most of which also have frequency counter modes) to measure the frequency > of signals at frequencies up to 1.3 GHz. None these units will deal with > frequencies higher than 512 MHz. > > Does anyone have any suggestions for off the shelf time nut quality > Prescalers ? Or would I be better off just buying something along the > lines of a suitably equipped 53131A or 53132A ? (If I end up buying > another counter I would rather buy another universal counter I could use > for time nuts stuff, vs simply buying a frequency counter for this > application.) > > Thanks in advance for any suggestions. > > Mark Spencer > > [email protected] > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
