Bob The gpsdos will be far superior to the method you are currently using. I will guess 100-1000 times better and higher. I took a quick look at EBAY boy there are lot of them these days. We all have our favorites. Trimbles, HPs... But what would help is understanding your need. What do you want to accomplish. Regards Paul WB8TSL
On Fri, Jan 25, 2019 at 9:05 PM Bob Albert via time-nuts < [email protected]> wrote: > Please excuse my ignorance but I have been trying to improve on my > frequency calibration. > I have always used WWV but when I try to get really close in frequency, > the beat and the fading are difficult to separate. > Someone suggested I get a GPSDO to refine my 10 MHz. I looked around and > have seen a few, mostly in the $100 range, but before I shell out fot > something I know little about I wonder if someone can give me a short > tutorial or at least some advice on what I need to do. > I live in Los Angeles so I imagine signals would be reasonably strong. > But what hardware and software do I need? I want 10 MHz to put into my > counter or, at least, to calibrate the time base in the counter. I prefer > the latter, since that means I won't have to receive GPS signals in order > to measure frequency. Most of the time I don't need really accurate > results. > I could run an outdoor antenna if needed. What receiver ought I look > into, how much budget do I need, and all the other questions relating to > this subject. > And finally, how much frequency error can I expect? > Bob > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
