Hi Bob,
Antenna is a PCTEL GPS-TMG-HR-26NCM ( 26 dB gain) antenna that feeds a
Polyphaser 095-0927T-A protector using 1/2 Super-flex. The HP
095-0927T-A would be downstream of the protector with about 100 feet
of additional super-flex.
Martin
On 1/27/2019 5:17 PM, Bob kb8tq wrote:
Hi
Yes I know, this is beating a dead horse …..
Since the HP splitter will knock out everything that is not right on
top of GPS, are you
sure you want to go that route? Yes it does depend a bit on the
antenna. If it’s one of
the telecom / narrowband gizmos then the splitter will not have much
affect.
I tend fo find that in a lab setting as broadband a feed as possible
is a really good idea.
You never really know what will pop up on the bench next.
Bob
On Jan 27, 2019, at 4:17 PM, Martin Flynn
<[email protected]> wrote:
Planning deployment of an 095-0927T-A GPS 1x4 antenna splitter with
the external power option (option 05Q) at our makerspace.
Anyone know what the mating DC connector is?
martin
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
