Hi Bill --
That's quite a nice design -- very simple but with a few additions would
do the job.
Thanks!
John
----
On 1/27/19 5:54 PM, Bill Beam wrote:
I went thru this several years ago and ended up home brew with the following
circuit:
<https://hassam794.weebly.com/digital-clock-using-4026-ic.html>
For adjustment of time indication I added switches to run hours and minutes at
1 pps
rate and a switch to stop seconds. Some always on leds for colons to make it
look
like a clock.
There are many other circuits out there but no complete commercial units.
On Sun, 27 Jan 2019 15:48:40 -0500, John Ackermann N8UR wrote:
I'm putting together a portable Rb standard and thought it would be nice
to include a clock on the panel. I probably haven't hit the magic
search words, but I haven't found what I'm looking: a module (no
enclosure) that is driven by an external PPS and shows at least HH:MM:SS
in 24 hour format on a small LED or LCD display.
I can whip something together with an Arduino, but rather than reinvent
the wheel I thought I'd ask if anyone knows of something that's ready to go.
Thanks,
John
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
Bill Beam
NL7F
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
