Dear Time Nuts, this is my first post to the group, hello! I've been reading the group for some time already, but now I've decided to contribute.
Since I am a phase noise enthusiast, I've assembled in the past few months a 3048A system. With a little difference. The relatively old 3048A system provides a limited selection of RF analyzers, which nowadays are hard to get (working at least) for a budget price. So I've acquired a newer spectrum analyzer HP 8594E (which is again old, but available on ebay), and of course it is not supported by the 3048A software. By poking around the DOS application, the 8594E is now happily working with the system. And yes, I actually like the fast DOS interface. Anybody interested in the patched app, let me know off the list. Here are two screenshots from my system: http://lea.hamradio.si/~s56jlp/tnuts/Setup_HP8594E.png ... Instrument setup http://lea.hamradio.si/~s56jlp/tnuts/X_03-10H.png ... PN measurement of two AT-cut crystal oscillators at 100MHz by my own R&D Regards, Leon _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
