Hello Time-Nuts, Not strictly time-nuts related, but the group seems to have outstanding resources. I'm looking for information (specifically the serial commands) for the Stanford Telecom STel-9270 Universal DDS Interface. This box has a serial interface that talks to a PC and produces a parallel interface that talks to a DDS box.
Unit was produced in the mid-90's. Intel absorbed the DDS part of Stanford Telecom in 1999. The serial interface talks to Hyperterminal at 9600, N, 8,1 and echos the typed characters. I have yet to get the serial port to produce anything but the echoed characters. I believe that the interface is pretty dumb and just translates the input command(s) into the proper DDS parallel signals. The problem is - what are the proper serial commands? I have yet to find any information on the STEL-9270. If anyone has ever used one of these units and can fill me in it would be appreciated. Or, if you can point me to someplace that might hold some information it would be great. Thanks in advance for any help. Skip Withrow _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
