Hi, This request interests me a lot because there is not a good technical product on the market. I would like something similar to the model 6460 TRAK Systems but with more advanced features such as a synchronization within 10nS with an external clock and a clock synchronization from GPS using both the NMEA code using also a PPS input in order to eliminate the delay due to the serial port communication. Unfortunately I do not have the skills to participate in this project but I sincerely hope that some brilliant mind among you can accommodate the request. Tom for example? Luciano
Da "time-nuts" [email protected] A "Discussion of precise time and frequency measurement" [email protected] Cc Data Fri, 22 Feb 2019 10:31:06 -0800 Oggetto [time-nuts] Clock project request from IEEE I received the following email and permission to post it on time-nuts: > Hello, > > I am the executive editor of the IEEE's flagship magazine, IEEE Spectrum. > I recently acquired a TAPR "Pulse Puppy" and I am intrigued by the idea of > using it to build a very precise clock that I would share with Spectrum's readers. > > I would like to partner with an engineer with experience in digital clocks, who > would be credited as co-author on this project. > > Can you suggest someone who might be interested in this project? I would be > much obliged if you had some suggestions. > > Kind regards, > -Glenn Glenn's contact info is: > Glenn Zorpette > [email protected] You can just imagine all the many ways the project could head. Send Glenn a note if you want to help. Or post here if you have suggestions. Thanks, /tvb _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
