Taka welcome to the time-nuts. Though I have no details on the Cesium its always good to meet a new time-nut. You have been lurking in the shadows to go from the basic systems to the Cesium. Nice. I am sure you will find help here in the group. Regards Paul WB8TSL
On Tue, Mar 5, 2019 at 10:34 PM Taka Kamiya via time-nuts < [email protected]> wrote: > Hello Time-nuts.... I'd like to join your club. > I've been lurking for quite some time. During this time, I went to Xtal > oscillator to OCXO to GPSDO to Rubidium to GPSD Rb to TODAY, Cesium > standard. I thought this would be a good time to stop lurking and start > talking. > The Cesium unit in question is Datum FTS-4040A. I bought it on cheap. I > have no evidence that Cs tube has ever been replaced but it locks in 6 > minutes and it is quite stable. It must be a basic unit because RS232 port > is not wired (connector is there), 1 pps is not there, and only output > available are 1, 5, and 10MHz. > > I would first like to collect manuals. I went to my "usual places" and > did not find any. I did find one for 4040B but the part I really need are > missing on mine and standard on B. First goal is to enable RS232C so I can > monitor. MONITOR connector is there but this is just for relay outputs for > major errors, etc. > > If anyone can help, I'd be very appreciative. I also would like to meet > fellow FTS-4040A owners and exchange notes. > > Thanks - > Taka in Orlando FL > --------------------------------------- > (Mr.) Taka Kamiya > I'm stuck in a wormhole.... Hello, worms! > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
