Hi Leo, sorry for my late reply. I have not yet measured the phase noise of my finished unit, since I am still waiting to complete my phase noise measurement equipment. However, I have a decent test report for my OCXO, where the phase noise spectrum is also plotted. I don't expect my distributor circuit which I connected to the OCXO to degrade the phase noise too much since it is just a bunch of OpAmps and resistors. I have a HP 8663A here for comparison, but I still lack a proper phase noise test set.
Tobias ________________________________________ From: time-nuts [[email protected]] on behalf of Leo Bodnar [[email protected]] Sent: Thursday, March 21, 2019 09:14 To: [email protected] Subject: Re: [time-nuts] Yet another GPSDO project. Tobias, Have you measured resulting phase noise of the finished unit? Thanks Leo > From: Tobias Pluess <[email protected]> > sure, I believe you since my primary requirement was phase noise. This is > because I'd like to use the OCXO as reference for my spectrum analyzer and > also for my HP 8663 signal generator to do phase noise measurements _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
