> We have agreed that I will do a board and make Gerber file available. Any comments or recommendations please off list.
Perhaps put the DAC and the OCVCXO on a daughter board using .1" headers as an interconnect (like an Arduino shield) so that different DAC/Osc designs can be swapped in and out. Wayne On Sun, Apr 7, 2019 at 12:01 PM ew via time-nuts <[email protected]> wrote: > A few more tests on the Lars GPSDO to better understand. The data is > reduced to 2 and 6 hours to reduce data volume. overwhelms our PC's but > tells us what Jim and we are looking for. We have agreed that I will do a > board and make Gerber file available. Most likely two Lars with pulse width > DAC and Jim's with a DAC. > Any comments or recommendations please off list.As part of our related > tests we found little change between Furuno GN87 and GT87 when used in a > GPSDO. > Bert_______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
