I agree Bob, I have seen many different versions, I have even seen one with option BVA (In a 1000B form-factor) and versions with 10MHz external ref input. But any schematic or service manual would be a great staring point even if a different version.
Tom Knox "Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein ________________________________ From: time-nuts <[email protected]> on behalf of Bob kb8tq <[email protected]> Sent: Saturday, May 4, 2019 5:00 PM To: Discussion of precise time and frequency measurement Cc: Jeff Kruth Subject: Re: [time-nuts] FTS 1050A Service Manual HI I suspect that as long as the 1050 has been around …. there are mulitple versions of the schematics. I doubt there ever *was* a service manual. It likely was a “factory repair only” sort of device. Bob > On May 4, 2019, at 5:53 PM, Jeff Kruth via time-nuts > <[email protected]> wrote: > > Hello! > Does anyone know where I might find the service manual (schematics > particularly) for the FTS 1050A Quartz Oscillator? PDF, printed, scratched on > papyrus, etc.? > N8UR sent me the operating manual, but I need a little more detail.MicroSemi > owns the stuff now and I have not contacted them, you know how it goes with > acquisitions.....Thanks! Jeff Kruth > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
