Hi I *assume* this one should have gone to the R-390 list. Probably should re-post it there and we can take it up over there.
Bob > On May 26, 2019, at 2:26 AM, Perry Sandeen via time-nuts > <[email protected]> wrote: > > Yo Bubba Dudes!, > Uh being of unsound mind since I'm planning on moving 2,200 miles in the > coming future...... > Honest honey, this R 390 was just sitting there on ebay at such a low price, > it uh just sorta, somehow err, followed me home. > So now that I have my 2nd one (and the first one is still untouched after 5 > years) > ---Yes, please doctor adjust my meds--- > Oh yes, where was I? Ms. Pelosi? > > Ah yes! Now I remember. > I am in the process of digitizing the OEM R 390 2 part ski from Andy > Morrer's site. This will be a long time coming. What I wanted to do is > incorporate in the ski's is information of parts that are problematic. > Under-wattage resistors, leaky caps, parts to add or improve or any > information of that nature. Or tips or tricks that I can add as annotations. > I will add an attribution list for those who contribute even if they are SK. > When done I'll make the BIT TIFF image available on several sites or from me. > For those who might not be familiar with the BIT type of image it is only > black or white no matter what print size is chosen - no smearing. So one can > go to Kinko's and for $10 get a 24" X 48" print to put on the wall if needed. > > So please send me any information you have whenever using an original email > and I'll add it to a word file and eventually incorporate it into the final > schematics > > Regards, > Perrier > > > > > > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
