Quoting Anthony Dunne <[email protected]>:
Firstly would this work?
Yes.
Secondly, my dilemma is the pin-out.
I believe on the DB9 pin 1 is DCD (the actual pulse) and pin 5 is
the ground. Is this correct?
Yes.
Could I use a cable such as this:-
No.
Alternatively, is there a simpler way to achieve the goal?
No, you really need a level shifting stage that converts the PPS to
RS232 levels.
Tom
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
