That was just what I was looking for, and the data links were especially
good,
as searches for 10544A data did not go well.
I also wound up with one 5335A that has a 10811A look-alike, but it is
made by *Piezo*,
and works incredibly well. The long term stability of it is remarkable
compared to all my other 10811A/10544A/B units.
I was quite happy with one rubidium for a bench standard, a hand made
unit I put together using an off-ebay-cell-tower FE5860A. but then I
broke down and bought a portable ball-efratom unit, and paid for a full
cal. such despair, now I know my little FE5680A is out 0.02Hz
(@10.0Mhz), and I have to try and adjust it serially, I am not looking
forward to that, as the support info is not very helpful, not to mention
the unappy fact I have nothing left with a serial port.
I also have a rack-mounted FEI FE-10A 5Mhz standard I have had for about
12 years. it has finally drifted 0.06Hz off frequency, and can't be
corrected via the front panel trim. I cannot find a manual anywhere
(only people looking for one). Does anybody have one to show the
internal adjustments?
many thanks,
walter
--
Walter Shawlee 2
Sphere Research Corp. 3394 Sunnyside Rd.
West Kelowna, BC, V1Z 2V4 CANADA
Phone: +1 (250-769-1834 -:- http://www.sphere.bc.ca
+We're all in one boat, no matter how it looks to you. (WS2)
+All you need is love. (John Lennon)
+But, that doesn't mean other things don't come in handy. (WS2)
+Nature is trying very hard to make us succeed, but nature does not depend on
us.
We are not the only experiment. (R. Buckminster Fuller)
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
