Hi Anders,
thank you for providing your graphics. Very interesting.
I will put my results to my github repository if done. Right now I have
to take a break for my surgery.
best regards
Chris
---
'Everything should be made as simple as possible, but not simpler.' -- Albert
Einstein
Am 06.09.2019 um 12:02 schrieb Anders Wallin:
If I am able to connect TimeLab with my FCA3103 in the future I also
want to compare this TIC with the
FA1 and TSA3011. Also important would be the fact whether the 'cheaper'
versions could be used to measure phase
noise as the TimePod 5330A or the PhaseStation 53100A devices and how
'low' they are going to do the job...
FWIW phase-noise floors with: FSW8, 3120A, and 5115A: ( USRP B210 @ 100 MHz
is also done, to be added..)
http://www.anderswallin.net/wp-content/uploads/2016/03/phase_noise_WR.png
if you make some repo (github?) for these measurements and noise-floors
then I can try to dig out the old data and contribute.
53230A adev-floors
http://www.anderswallin.net/wp-content/uploads/2015/04/Keysight_53230A_noise_floor.png
and RCON mode:
http://www.anderswallin.net/wp-content/uploads/2015/06/RCON_vs_CONT.png
Anders
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
