Have to say that chip looks identical to what Burt sent earlier. Settings and all.
On Mon, Sep 9, 2019 at 3:01 PM Bob via time-nuts <[email protected]> wrote: > You might look at the NB3N502 PLL mult chip. I've used this chip on my > rubidium interface board and other projects. It's cheap, current > production and does a number of multipliers from 2X 2.5X 3X 3.333333x 4X > and 5X Available from Mouser and others. I'm using one in a hybrid CW > transmitter as a nearly coil-less scheme with a 6CL6 final. all 5 bands > from either a 80 meter or 40 meter crystal. Keys really clean too. > Bob, KE6F > > > -----Original Message----- > From: paul swed <[email protected]> > To: Discussion of precise time and frequency measurement < > [email protected]> > Sent: Mon, Sep 9, 2019 9:01 am > Subject: Re: [time-nuts] 5 Mhz to 10 Mhz and 25 Mhz > > Bert was looking at the ICS512 and have to agree the price is cheap. How > have you applied them. It seems really simple. Do you follow with > filtering. Looking at 5 > 10 MHz and 5 > 15... > regards > Paul > WB8TSL > > On Mon, Sep 9, 2019 at 7:03 AM ew via time-nuts <[email protected]> > wrote: > > > PaulThe easiest way is one or two ICS512 or ICS570B we use the 570 > > extensively. Digi Key and ebay have both > > Bert Kehren > > In a message dated 9/8/2019 10:49:33 AM Eastern Standard Time, > > [email protected] writes: > > > > Dear all > > > > Can any one point me in the direction of a circuit that can convert > > 5 Mhz signal to give me 2 outputs one at 10 Mhz and another at 25 Mhz > > > > > > Regards Paul B > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
