It has been 17 years since Steve Smith, G8LMX (Nottingham, UK) has taken time-nuts on his ‘Fantastic Voyage’ inside the dual oven of the HP 10811. https://www.realhamradio.com/GPS-oven-journey.htm I believe the challenge will be sourcing Quality Components properly characterized to operate at your designed temperature. Surface Mount component advances, over the past 25 years, have reduced component size this reduction may introduce new issues to be addressed.
greg == Date: Fri, 13 Sep 2019 From: Club-Internet Clemgill <[email protected]> To: <[email protected]> Subject: Re: [time-nuts] HP 10811 parts ref My plan is to ‘clone‘ as close as possible the initial 10811 design, as it is well proven. Except changing the crystal and possibly use modern components if they bring any improvement, and adapting the ‘mass‘ to the crystal format and manufacturing it through 3D printing. Did anybody tried something similar ? Best, Gilles. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
