Hello Hal, The PPS signal is on pin #3 - on the lower right in the picture - you'll see the LED and the resistor - you should be able to pick off the PPS signal from there.
73's, John AJ6BC On Sat, Sep 21, 2019 at 5:00 PM Hal Murray <hmur...@megapathdsl.net> wrote: > > j...@westmorelandengineering.com said: > > Just saw this at All-Electronics - thought some here could be interested: > > https://www.allelectronics.com/item/gps-8m/gps-module/1.html > > No obvious PPS connection. > > There may be a PPS LED where you could pick it up, but I don't see any > documentation. > > > -- > These are my opinions. I hate spam. > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.