Thanks for the input. I just ordered one.
(My 78th birthday will be next month. I should be downsizing but here I am
buying more stuff.)
Wes N7WS
On 9/26/2019 6:25 PM, Mark Sims wrote:
Miy FA2 came in today. A very quick test shows that it works. It does not
appear to have the -0.0002 Hz freq measurement bias that the FA1 has.
The 0.1 second gate time mode is pretty useless... there appears to be a 300
msec dead time between measurements in 0.1 (and 10 sec) gate time modes so you
only get a new reading every 400 msecs. 10 second gate time produces a reading
every 10300 msecs. 1 sec gate time outputs readings every 1100 msecs (like the
FA1).
It auto-detects the presence of an external reference... no way to manually
switch between internal and exterrnal references. I have not done any testing
on the internal ref or the high freq channel.
The screen shows a LPF setting and a 50 ohm setting... no idea if these are
switchable.... there is no documentation.
The screen shows the input signal level.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
