I doubt that you can find a suitable larger replacement display. Besides
interface compatibility issues, a larger display will probably have more pixels
than the FA2 firmware expects.
I have added FA1/FA2 support to Lady Heather. It includes a command (ZF) to
zoom the screen to a full screen frequency counter display. A Raspberry PI
with the 800x480 touch sceeen display works very well. Heather supports
running with two FA1/FA2 counters (or even an FA1 and a FA2).
See the attached screen dump for the resulting display. The plot stats are
from Lady Heather's calculations and not the FA2's calculated statistics. The
main input device is a FA2. The auxiliary input device is a FA1. I'm working
on simultaneously displaying statistics for both devices... but the PI
touchscreen does not have enough space.
----------------
>but I'd be more than happy to have it less wee and relocate it into a larger
>box if it was practical to replace that display with something bigger that
>could actually be read from a bit further away than an inch or two when
>running standalone
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
