--------
In message
<sn1pr07mb390174dfef62f4bf054c814ace...@sn1pr07mb3901.namprd07.prod.outlook.com>,
Mark Sims writes:
>NRCAN / csrs-ppp will do L1 only data. Typical results have errror ellipses
>in the 300-500 mm range.
Then your RINEX files must have some flaw in them.
NRCAN process both L1 and L2:
OBS G L1C L2C C1C C2C
I get horizongal uncertainties of around a centimenter and vertical around 2cm:
POS CRD SYST EPOCH A_PRIORI ESTIMATED
DIFF SIGMA(95%) CORRELATIONS
POS X IGS14 19:301:62520 3558657.3400 3558658.2826
0.9426 0.0130 1.0000
POS Y IGS14 19:301:62520 713469.6500 713470.3210
0.6710 0.0081 0.3067 1.0000
POS Z IGS14 19:301:62520 5227269.8000 5227271.1311
1.3311 0.0133 0.8625 0.2978 1.0000
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
p...@freebsd.org | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
